1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter CONSOLIDATED BEARING 7207 BG P/6 Precision Ball BearingsCode system
| Type | Bevel | Motor Power | 0.18kw-160kw | Voltage | 380V ( Also Done as Your Need) |
| Frequency | 50/60Hz | Enamelled Wire | Copper Wire ( Also Done Aluminum as Your Need) | Color | Done as Your Need (Common Blue) |
| Gearbox Body | Cast Iron | Surface Hardness of Gear | HRC58°-62° | Protection Grade | IP55 |
| Gear | 20crmnti | Housing Hardness | Hbs90-240 | Trademark | GPHQ |
| Transport Package | Carton /Plywood Case/Wooden | Origin | China | HS Code | 84834090 |
| N1 | 15.875 mm |
| Stabilizing ring | SR-10-0 |
| Da | 90 mm |
| RG | 1/8 NPT |
| H2 | 23.813 mm |
| Mass pillow block | 6.19 kg |
| h | 27.781 mm |
| Cap bolt | 2 x 7/16-14 UNC |
| S | 3.572 mm |
| da | 42.862 mm |
CONSOLIDATED BEARING 7207 BG P/6 Precision Ball Bearings Calculator
Dynamic (Ca):1076 kN; r1s (min):6 mm; B:82 mm; E:mm; b1:39.5 mm; b:21 mm; d2:360 mm; s:5 mm; d2 (max):423 mm; Pu:136.150 kN;
Read More ...
d:240 mm; B1:13.5 mm; r3,4 min.:4 mm; B2:29.5 mm; Mass angle ring:4.6 kg; d1 ≈:311.8 mm;
Read More ...
D:120.0000 mm; Grease Speed Rating n1:5300 rpm; B:23.00 mm; Basic Static Radial Load Rating Co:14000 N; Oil Speed Rating n2:6300 rpm; d:65.000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:35100 N;
Read More ...
Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:2800 rpm; Grease Speed Rating n1:2200 rpm; D:250.0000 mm; Basic Dynamic Radial Load Rating C:168000 N; B:33.00 mm; d:180.000 mm; Basic Static Radial Load Rating Co:212000 N;
Read More ...
Basic Dynamic Radial Load Rating C:55300 N; Accessories:One Seal; Sealed Speed Rating n3:4900 rpm; Fillet Radius ra:1.50 mm; B:25.00 mm; Basic Static Radial Load Rating Co:31000 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Grease Speed Rating Open/Shielded n1:7000 rpm; d:35.000 mm; D:100.0000 mm;
Read More ...
d:35.000 mm; Grease Speed Rating n1:6000 rpm; Accessories:One Shield & Snap-Ri; Basic Static Radial Load Rating Co:27500 N; Basic Dynamic Radial Load Rating C:37700 N; Fillet Radius ra:1.00 mm; B:30.20 mm; Sealed Speed Rating n3:6000 rpm; D:72.0000 mm; Oil Speed Rating n2:8000 rpm;
Read More ...
Basic dynamic load rating C:7480 kN; d1 ≈:567 mm; Comparative axial load rating CFa:324 kN; Comparative radial load rating CF:2000 kN; Calculation factor e:0.33; Fatigue load limit Pu:1460 kN; Thrust factor K:1.76; r3,4 min.:6.4 mm; T:400.05 mm; D1 ≈:653 mm;
Read More ...
Oil Speed Rating Open/Shielded n2:6800 rpm; d:35.000 mm; Grease Speed Rating Open/Shielded n1:5600 rpm; B:25.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:53900 N; D:100.0000 mm; Basic Static Radial Load Rating Co:39000 N; Accessories:Two Shields & Snap-R;
Read More ...
P180°:950 kN; Ca:116 mm; N:34 mm; Adapter sleeve:HA 3136 L; Locating ring:2 x FRB 10/300; P55°:2400 kN; H:353 mm; s:15 mm; Appropriate attachment bolt, size G:24 mm; Mass housing:77.5 kg;
Read More ...
N1:15.875 mm; Stabilizing ring:SR-10-0; Da:90 mm; RG:1/8 NPT; H2:23.813 mm; Mass pillow block:6.19 kg; h:27.781 mm; Cap bolt:2 x 7/16-14 UNC; S:3.572 mm; da:42.862 mm;
Read More ...
with tapered bore:1209 ; D:85 mm; Pu:7.360 kN; B1:mm; d:45 mm; rs Dynamic (Cr):1.1 mm; B:19 mm; Oil:7 500 min-1; Grease:0.330 kN; Static (Cor):22.560 kN;
Read More ...
J min.:295.275 mm; H1:114.3 mm; Mass pillow block:40.4 kg; Initial grease fill:181.44 g; J1:60.325 mm; S:4.763 mm; P60°:175 kN; Da:180 mm; P90°:105 kN; Bearing limiting speed:4500 r/min;
Read More ...
Pu:433.490 kN; F:480 mm; s:16 mm; Dynamic (Ca):3410 kN; r1s (min):6 mm; d2 (max):mm; Static (Coa):5960 kN; rs (min):6 mm; b1:mm; B:185 mm;
Read More ...
Cap bolt, SAE grade:8; Stabilizing ring:2 x SR-1617; h:47.625 mm; R2:30.163 mm; R1:65.088 mm; Ca:69.799 mm; Housing:SAF 617; Cap bolt:2 x 3/4-10 UNC; P120°:35.6 kN; Da:180 mm;
Read More ...
Sealed Speed Rating n3:4000 rpm; Basic Static Radial Load Rating Co:64000 N; Fillet Radius ra:2.00 mm; d:50.000 mm; Accessories:Shield & Seal; Basic Dynamic Radial Load Rating C:85200 N; B:47.60 mm; Grease Speed Rating n1:4000 rpm; D:110.0000 mm; Oil Speed Rating n2:5300 rpm;
Read More ...
| 1.378 Inch | 35 Millimeter x 2.835 Inch | 72 Millimeter x 0.669 Inch | 17 Millimeter CONSOLIDATED BEARING 7207 BG P/6 Precision Ball Bearings cross reference by manufacturer |
| a | b | F | D | G | B | A | L |
| K-17 X 22 X 20 | - | - | - | - | - | - | - | - |
| NJ-2334 M | - | - | - | 110.0000 mm | - | 47.60 mm | - | - |
| 2306-K 2RS C/3 | - | - | - | 85 mm | - | 19 mm | - | - |
| 54311 | - | - | - | 250.0000 mm | - | 33.00 mm | - | - |
| LS-4060 | - | - | - | - | - | - | - | - |
| NH-313 M W/23 | - | - | - | 100.0000 mm | - | 25.00 mm | - | - |
| 918 | - | 21 mm | - | - | - | 82 mm | - | - |
| N-419 M C/3 | - | - | - | 100.0000 mm | - | 25.00 mm | - | - |
| NATR-12 | - | - | - | 120.0000 mm | - | 23.00 mm | - | - |
| A 5228 | - | - | - | - | - | - | - | - |
| 1216 C/3 | - | - | - | - | - | - | - | - |
| NJ-312 M | - | - | - | 72.0000 mm | - | 30.20 mm | - | - |
| 61908 | - | - | 480 mm | - | - | 185 mm | - | - |
| N-203E M | - | - | - | - | - | - | - | - |
| 2222-KM C/3 | - | - | - | - | - | - | - | - |
| GE-140 C-2RS | - | - | - | 140.0000 mm | - | 48.00 mm | - | - |
| K-20 X 26 X 12 | - | - | - | - | - | - | - | - |
| PNA-17/35 | - | - | - | - | Tr 670x6 | - | 11 mm | - |
| F-60/1.5 | - | - | - | 26.0000 mm | - | 8.00 mm | - | - |
| SS624-ZZ | - | - | - | - | - | - | - | - |
| NU-209 M | 13.766 mm | - | - | - | - | - | - | - |
| 30217 P/5 | - | - | - | - | - | - | - | - |
| 6308-K 2RS | - | - | - | - | Tr 420x5 | 52 mm | 6.5 mm | - |
| 23022E M C/3 | - | - | - | - | - | - | - | - |
| NU-312E J C/4 | - | - | - | 320.0000 mm | - | 65.00 mm | - | - |
| NJ-313E | - | - | - | 175.0000 mm | - | 30.00 mm | - | - |
| 7616 DLG | - | - | - | - | - | - | 350 mm | - |
| 214-ZZ C/3 | - | - | - | - | - | - | - | - |
| 88513 | - | - | - | 57.1500 mm | - | 25.40 mm | - | - |
| STO-50X | - | - | 75 mm | - | - | 28 mm | - | - |
| 6004-2RSNR | - | - | - | - | - | - | - | - |
| FR-90/10 | - | 8 mm | - | - | - | - | - | - |
| NJ-315 | - | - | - | 26.0000 mm | - | 8.00 mm | - | - |
| 7214 BG UA | - | - | - | - | - | - | - | - |
| 51332 M | - | - | - | 24.0000 mm | - | - | - | - |
| 5316 WB | - | - | - | 30.0000 mm | - | 18.00 mm | - | - |
| 7612 DLG | - | - | - | - | - | - | - | - |
| NU-2318E | - | - | 330 mm | - | - | 130 mm | - | - |
| NJ-313E C/3 | - | - | - | 47.0000 mm | - | 20.64 mm | - | - |
| 51107 P/6 | - | - | - | - | - | - | - | - |
| 23218E C/3 | - | 13.9 mm | 326 mm | - | - | 180 mm | - | - |
| 61812 C/3 | - | - | - | - | - | - | - | - |
| 30336 | 128.183 mm | - | - | - | - | - | - | - |
| 71918 TG P/4 | - | - | - | 140.0000 mm | - | 33.00 mm | - | - |
| NU-264 M | - | - | - | 80.0000 mm | - | 11.00 mm | - | - |
| IR-95 X 110 X 63 | - | - | - | 210 mm | - | 80 mm | - | - |
| N-304E | - | - | - | - | - | - | - | - |
| 20230 M | - | - | - | - | - | - | - | - |
| 61807 P/6 | - | - | - | - | - | - | - | 380 mm |
| SS61704-2RS | - | - | - | - | - | - | - | - |
| 32932 P/5 | - | - | - | - | - | 58.7 mm | - | - |
| 7305 TG P/4 | - | - | - | - | - | - | - | 330.2 mm |
| N-305 C/3 | 34 mm | - | - | 150 mm | - | 36 mm | - | - |
| 61902 | - | - | - | 180.0000 mm | - | 46.00 mm | - | - |
| 7311 BMG P/6 | - | - | - | - | - | - | - | 950 mm |
| 6206-2RS P/6 C/3 | - | - | - | 460.0000 mm | - | 74.00 mm | - | - |
| 32010 X P/6 | - | - | - | 47.0000 mm | - | 20.60 mm | - | - |
| 2306 C/3 | - | - | - | - | - | - | - | - |
| 63/32 N | - | - | - | 62.0000 mm | - | 16.00 mm | - | - |
| NJ-2304E | - | - | - | 42 mm | - | - | - | - |
| 24064-K30 M C/3 | - | - | - | 85 mm | - | - | - | - |
| IR-17 X 22 X 13 | - | - | - | 170.0000 mm | - | 39.00 mm | - | - |
| 22224E-KM | - | - | - | - | Tr 600x6 | 75 mm | - | - |
| K-40 X 45 X 13 | - | - | - | - | 44.882 mm | 11.379 mm | - | - |
| 52210 | - | - | - | - | 159.614 mm | 26.441 mm | - | - |
| NUP-2318 | - | - | - | 160.0000 mm | - | 74.00 mm | - | - |
| NJ-2314 | 27 mm | - | - | - | - | 19 mm | - | - |
| RNA-49/32 | - | - | - | - | - | - | - | 419.1 mm |
| 5303-ZZNR C/3 | - | - | - | - | - | - | - | - |
| NJ-2220E C/4 | - | - | - | - | - | - | - | - |
| 6044 M P/6 C/3 | - | - | - | - | - | 73 mm | - | - |
| NU-305E C/4 | - | - | - | - | - | - | - | 419.1 mm |
| 5406 B W | - | - | - | 26.0000 mm | - | 8.00 mm | - | - |
| 32960 | - | 3.1 mm | - | 130 mm | - | - | - | - |
| NU-2203 | - | - | - | - | - | 550 mm | - | - |
| K-38 X 46 X 20 | - | - | - | 240 mm | - | - | - | - |
| 150-R | - | - | - | - | - | - | - | 869.95 mm |
| 6006 M C/3 | - | - | - | 225.0000 mm | - | 49.00 mm | - | - |
| MS-7-AC D | - | - | - | - | 219.151 mm | 32.004 mm | - | - |
| 3801-2RS | - | - | - | - | - | - | - | - |
| KF-100 XPO | - | - | - | 190.0000 mm | - | 72.00 mm | - | - |
| NATR-10X | - | - | - | 160.0000 mm | - | 68.30 mm | - | - |
| NJ-410 C/4 | - | - | - | 80.0000 mm | - | 38.10 mm | - | - |
| 23056-KM C/4 | - | - | - | - | - | - | - | - |
| 6016 T P/5 C/2 | - | - | - | - | - | - | - | - |
| KU-47 CPO-2RS | - | - | - | - | - | - | - | - |
| 319 M | - | 36 mm | - | - | Tr 480x5 | 60 mm | - | - |
| K-47 X 55 X 28 | - | - | - | 290.0000 mm | - | 92.00 mm | - | - |
| RNA-6906 P/5 | - | - | - | - | - | - | - | 749.3 mm |
| LS-2035 | 171 mm | - | - | 540 mm | - | 82 mm | - | - |
| 6315 M P/5 | - | - | - | - | - | - | - | - |
| 29336E M | - | - | - | 1765 mm | - | 1360 mm | - | - |
| NUKR-85 | - | - | - | 265.0000 mm | - | 60.00 mm | - | - |
| KB-25 ARO | - | - | - | - | - | - | - | - |
| 16020 P/6 | - | - | - | - | M 56x4 | - | - | - |
| LS-22-AC D | - | - | - | 160.0000 mm | - | 68.30 mm | - | - |
| 53316 | - | - | - | 90 mm | - | 23 mm | - | - |
| 7207 BG P/6 | - | - | - | 150.0000 mm | - | 35.00 mm | - | - |
| 5205-2RS P/6 C/3 | - | - | - | - | - | 150 mm | - | - |
| MS-14 1/2-AC | - | - | 543 mm | - | - | - | - | - |
| 686 | - | - | - | - | - | 10 mm | - | - |
| HK-4520 | - | - | - | - | - | - | - | - |
| YCRSC-48 | - | - | - | - | - | - | - | - |
| 6209-2RSN | - | - | - | 110.0000 mm | - | 44.40 mm | - | - |
| CRSBE-14 | - | - | - | 75.0000 mm | - | 16.00 mm | - | - |
| NAB-50 | - | - | - | - | - | - | - | - |
| 88011 NR | - | - | - | - | - | - | - | - |
| 5215 | - | - | - | - | - | 34.00 mm | - | - |
| NAS-55 C/3 | - | - | - | - | - | - | - | - |
| KU-70 XPO-2RS | - | - | - | 225.0000 mm | - | 98.00 mm | - | - |
| 6021 M | - | - | - | 215 mm | - | - | - | - |
| 2306 M C/3 | - | - | - | 205.0000 mm | - | 34.00 mm | - | - |
| 11505 | - | - | - | - | - | - | - | - |
| KA-120 CPO | - | - | - | - | - | - | - | - |
| 23032-K | - | - | - | - | - | - | - | - |
| EW-1 3/4 | - | - | - | 990.6 mm | - | - | - | - |
| NKI-100/30 | - | - | - | - | M 36x3 | 25 mm | - | - |
| 51222 P/6 | - | - | - | - | - | 144 mm | - | - |
| 6008-2RSN | - | - | - | 110.0000 mm | - | 36.50 mm | - | - |
| SS635 | - | - | - | - | - | - | - | 330.2 mm |
| 6201/008-2RS | - | - | - | 68.0000 mm | - | 15.00 mm | - | - |
| 6311-ZZ | - | - | - | 1460 mm | - | 500 mm | - | - |
| CRSBE-18 | - | - | - | 52.0000 mm | - | 15.00 mm | - | - |
| WC88008 | - | - | - | 90.0000 mm | - | 39.70 mm | - | - |
| SIL-45 ES | - | - | - | - | - | - | - | 361.95 mm |
| 6216 NR C/2 | - | - | - | - | - | - | - | - |
| EW-2 | - | - | - | 135 mm | - | - | - | - |
| 6302-ZZNR C/3 | - | - | - | 8 mm | - | 4 mm | - | - |
| T-749 | - | - | - | 260.0000 mm | - | 110.00 mm | - | - |
| 6009 Z C/3 | - | - | - | 180 mm | - | 100 mm | - | - |
| 6305-Z C/3 | - | - | - | 52.0000 mm | - | 22.20 mm | - | - |
| KA-110 XPO | - | - | - | 150.0000 mm | - | 28.00 mm | - | - |
| 239/630 M | - | - | - | 290.0000 mm | - | 92.00 mm | - | - |
| 5204-2RSNR C/3 | - | - | - | - | - | - | - | - |
| NU-215E C/4 | - | - | - | 62.0000 mm | - | 23.80 mm | - | - |
| NCF-18/530V | - | - | - | 52.0000 mm | - | 15.00 mm | - | - |
| NN-3014 MS P/5 | - | - | - | 47.0000 mm | - | 9.00 mm | - | - |
| NU-3038-KM C/5 | - | - | 95 mm | 160 mm | - | 37 mm | - | - |
| KG-120 XPO-2RS | - | - | - | 110.0000 mm | - | 27.00 mm | - | - |
| 6344 M | - | - | - | - | - | - | - | - |
| 93116 | - | - | - | 1030 mm | - | 63 mm | - | - |
| 6000-2RSNR | 31.095 mm | - | - | - | - | 46 mm | - | - |
| NJ-212 M W/23 | - | - | - | 200.0000 mm | - | 48.00 mm | - | - |
| 30316 P/5 | - | - | - | - | - | - | - | 419.1 mm |
English
BEARING PRECISION AXLE CORP.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CONSOLIDATED BEARING 30316 P/5 Tapered Roller Bearing Assemblies
2.362 Inch | 60 Millimeter x 4.331 Inch | 110 Millimeter x 0.866 Inch | 22 Millimeter CONSOLIDATED BEARING NJ-212 M W/23 Cylindrical Roller Bearings
CONSOLIDATED BEARING 6000-2RSNR Single Row Ball Bearings
0.5 Inch | 12.7 Millimeter x 0.875 Inch | 22.225 Millimeter x 1 Inch | 25.4 Millimeter CONSOLIDATED BEARING 93116 Cylindrical Roller Bearings
CONSOLIDATED BEARING 6344 M Single Row Ball Bearings