REXNORD MBR220807 Flange Block Bearings

RoHS:6; Housing Material:1045 Carbon Steel; Width T(mm):25 ～ 60; Days to Ship:7 Days; Flange O.D. H(φ):45; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Bearing Part Number:6900; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:No;

Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Retained:No; Volume Discount:Available; Shape:Flanged Pilot Type; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; RoHS:6;

Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Days to Ship:9 Days or more; Load Direction:Radial; D:180; Bearing Style:Open Type; Number of Raceway Ring Rows:Double Row; Precision:Grade 0; Precision:Grade 0;

Pillow/Plummer Block Style:Split Cylindrical Ho; Support Type:Two-Bolt Plummer Blo; Note:This product line wa; Dimension M:60 mm; Cr - Dynamic Load Rating:14613 lbf; Dimension L:205 mm; Bearing Number:LSM40BX; Bolt Size:2 x M12; Shaft Size:40 mm; Maximum Speed:5400 rpm;

Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing Part Number:6001; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Days to Ship:7 Days; Shape:Flanged Pilot Type; Volume Discount:Available; Seals:DD (Contact Rubber S;

Size Standards:Metric System; Seal, Shield Symbols:No; Holder Symbol:T1X; Number of Raceway Ring Rows:Single Row; Basic Load Rating, Static Rating(N):2260; Rubugado Symbol:No; Load Direction:Radial; Accuracy(Class):Class 0; Basic Dynamic Load Rating(N):4350; I.D.(Ø):15;

Weight:1.88 kg; SW:3.97 mm; s1:21.75 mm; Recommended tightening torque for set screw:8 Nm; C0:23.2 kN; T min.:-40 °C; G:M6x1; A5:32.6 mm; S:10.9 mm; A3:2 mm;

R - Cone Backface To Clear Radius3:0.14 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:7890 lbf; Ab - Cage-Cone Frontface Clearance:0.17 in; Aa - Cage-Cone Backface Clearance:0.04 in; G2 - Heat Generation Factor (Rib-Roller End):1160; Cone Part Number:LL365348; db - Cone Backface Backing

Days to Ship:14 Days; Volume Discount:Available; Shape:Square; Surface Treatment:Surface Treatment Pr; Shape:Square; Thread Nominal T(inch):7/8-9; RoHS:6; Screw Type:Metric (Coarse) Thre; Type:Lock Nuts; Material:[Steel] 1045 Carbon;

RoHS:6; Basic Load Rating, Static Rating(N):48300; Unit Body Material:Cast Iron; Grease Type:Standard Grease; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Fit:J7; Surface Treatment:No; d:75; B:82.6;

Radial clearance class:C3; Noun:Bearing; Category:Cylindrical Roller B; Brand:NTN; Retainer:Yes; da max:119 mm; E:173.5 mm; da min:108 mm; Relubricatable:Yes; Nlim (grease):3,000 rpm;

r - Cup Frontface To Clear Radius2:0.03 in; Ab - Cage-Cone Frontface Clearance:0.11 in; C - Double Cup Width:1.8125 in; T - Bearing Width across Cones:2.0624 in; Cup Part Number:394YD; R - Cone Backface To Clear Radius1:0.09 in; D:4.3307 in; Design Units:Imperial; Cg - Geometry Factor11:0.0984; B -

L Dimension Tolerance:+0.000/-0.005; RoHS:6; Days to Ship:8 Days; L Dimension Tolerance:+0.000/-0.005; L(inch):0.125 ～ 4;

Flush Ground:No; Category:Precision Ball Beari; Fatigue limit load, Cu:0.87 kN; Noun:Bearing; Static load, C0:19.1 kN; D:80 mm; Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.38 Hz; Brand:NTN; f0:13.1;

Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Bearing I.D. d(mm):12; Shape:Flange Type; Bearing Part Number:6001; Housing Material:1045 Carbon Steel; Days to Ship:7 Days; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb;